3.1.Outdoor Based Guiding or Stimulating Surface: These products are generally preferred in outdoor applications. It should comply with the dimensions and standards specified by the Ministry. This tactile surface type is manufactured from TPU (Thermoplastic Polyurethane) raw material. Its application is as follows: After cleaning the grounded tactile surfaces, the floor or the tactile surface, Special PU adhesive is applied and fixed with wedges from 5 points. The desired non-slip feature on the tactile surface should also be available in this product. Implementation is carried out in accordance with TS ISO 23599, TS 13536 Implementation standards.
3.2.Indoor Baseless Tape Guide and Stimulating Surfaces: This type of tactile surface is also used in indoor applications. This palpable surface is also manufactured from polycarbonate (PC) material. Before the application, the floor should be cleaned with alcohol. After applying the primer solution on the cleaned floor, the tape on the back of the product should be removed and the application should be made according to the application template. The use of 1.2 mm high-density vhb double-sided tape for tactile surface products is another issue to be considered. The ground and weather conditions should be taken into consideration. The desired non-slip feature on the tactile surface should also be available in this product. The presence of tissues to prevent slipping will minimize the danger of slipping. Implementation is carried out in accordance with TS ISO 23599, TS 13536 Implementation standards.
